988H


  • Engine
    Net Power 373.0 kW
    Engine Model Cat® C18 ACERT®
    Gross Power 414.0 kW
    Net Power – ISO 9249 373.0 kW
    Gross Power – ISO 3046-2 388.0 kW
    Bore 145.0 mm
    Stroke 183.0 mm
    Displacement 18.1 L
    Net Power ISO 14396 397.0 kW
    Net Power – EEC 80/1269 373.0 Kw
    OPERATING SPECIFICATIONS
    Operating Weight 50144.0 kg
    Rated Payload 11.4 tonnes
    TRANSMISSION
    Converter Drive – Forward 1 6.7 km/h
    Converter Drive – Forward 2 11.8 km/h
    Converter Drive – Forward 3 20.8 km/h
    Converter Drive – Forward 4 36.0 km/h
    Converter Drive – Reverse 1 7.6 km/h
    Converter Drive – Reverse 2 13.5 km/h
    Converter Drive – Reverse 3 23.7 km/h
    Direct Drive – Forward 1 Lock-up disables
    Direct Drive – Forward 2 12.3 km/h
    Direct Drive – Forward 3 21.9 km/h
    Direct Drive – Forward 4 38.6 km/h
    Direct Drive – Reverse 1 7.9 km/h
    Direct Drive – Reverse 2 14.1 km/h
    Direct Drive – Reverse 3 25.1 km/h
    HYDRAULIC CYCLE TIME
    Raise 9.4 Seconds
    Dump 2.4 Seconds
    Lower Float Down (Empty) 3.8 Seconds
    Total Hydraulic Cycle Time 15.6 Seconds
    SERVICE REFILL CAPACITIES
    Fuel Tank 712.0 L
    Cooling System 103.0 L
    Crankcase 60.0 L
    Transmission 70.0 L
    Differentials and Final Drives – Front 186.0 L
    Differentials and Final Drives – Rear 186.0 L
    Hydraulic System (factory fill) 470.0 L
    Hydraulic System (tank only) 267.0 L
    DIMENSIONS*
    Wheel Base Length 4550.0 mm
    Height to Top of Exhaust Stacks 4112.0 mm
    Height to Top of Hood 3156.0 mm
    Ground Clearance 549.0 mm
    Height to Top of Cab 4128.0 mm
    Height to Top of Air Cleaner 3382.0 mm
    Center Line of Rear Axle to Edge of Rear Bumper 3132.0 mm
    Center Line of Front Axle to Hitch 2275.0 mm
    Net Power ISO 14396 397.0 kW
    Net Power – EEC 80/1269 373.0 Kw
    C-Pin Height 1009.0 mm
    Dig Depth 226.0 mm
    Rack Back Angle at Ground 47.8 Degrees
    Rack Back Angle at Carry 56.5 Degrees
    Clearance at Maximum Lift/Dump 3879.0 mm
    Height to Spillguard 5432.0 mm
    B-Pin Height 5853.0 mm
    Rack Back Angle at Maximum Lift 45.0 Degrees
    BUCKETS
    Bucket Capacities 6.4 m3-7.7 m3 8.3 yd3-10 yd3
    Max. Bucket Capacity 7.7 m3
    AXLES
    Maximum Single-Wheel Rise and Fall 568.0 mm
    Front Fixed
    Rear Oscillating ±13°
    BRAKES
    Brakes Meet SAE ISO 3450:1996
    STEERING
    Steering Meets SAE and ISO standards
    Total Steering Angle 86.0 Degrees
    CAB
    Cab – ROPS/FOPS Meets SAE and ISO standards
    Sound Performance Meets ANSI, SAE and ISO standards
    LOADER HYDRAULIC SYSTEM
    Main Hydraulic System Output at 2010 rpm and 6900 kPa (1000 psi) 492.0 L/min
    Sound Performance Meets ANSI, SAE and ISO standards
    Relief Valve Setting 35000.0 kPa
    Cylinders, Double Acting: Lift, Bore and Stroke 220 × 911 mm 8.7 × 35.9 in
    Cylinder, Double Acting: Tilt, Bore and Stroke 220 × 1770 mm 8.7 × 69.7
    Pilot System, Gear-Type Pump Output at 2010 rpm and 2500 kPa (363 psi) 76.0 L/min
    Relief Valve Setting (low idle) 2400.0 kPa

  • PRODUCTIVITY

    POSITIVE FLOW CONTROL HYDRAULICS

    The 988H Positive Flow Control (PFC) Hydraulic System is highly effective . Lowers fuel consumption,gives better hydraulic response allowing operator better control of the bucket. Also improves power efficiency and lowers system heat.

    Lift Cylinder Increase and Regen Valve Retrofit Kit.: Both of these features improve dig cycle through improved control and lift force capacity.

    Payload Control System. The new Payload Control System 3.0 helps you manage truck payloads and produce accurate records of material being moved. This advanced electronic control system is designed for on-the-go weighing and gives significant improvement to the operator interface.

    Planetary Powershift TransmissionThe planetary powershift transmission comes with the Impeller Clutch Torque Converter (ICTC) and Rimpull Control System (RCS). Transmission clutch control provides improved shift quality, component life and operator comfort

    Automatic Kickouts. Operators can easily set the dump height, return to dig/carry or bucket angle from the comfort of the cab. Standard, in-cab programmable kickouts, located in the upper left hand switch panel. This feature provides more flexibility and improved productivity when the job requires load and dump target heights.

    Lower Operating Cost/Serviceability

    Fuel Management

    988H FUEL MANAGEMENT SYSTEM

    The Cat® 988H Wheel Loader Fuel Management System delivers superior productivity and fuel savings . With the 988H fuel management system,it will be easy for you to choose the level of fuel savings you want to achieve. By simply setting a rocker switch in the cab, you can easily accommodate changing production demands by moving between three modes of operation: Full power mode, balanced power mode,maximum fuel savings mode.

    AUTO IDLE KICKDOWN (AIK)

    If an operator is not actively operating the 988H for a specific period of time, the AIK system will temporarily reduce the engine speed to save fuel. Afteran e automated engine speed reduction, the system will automatically resume the engine speed to the previous setting when the operator engages the implement control pod of the F-N-R switch or the STIC Steer.

    ENGINE IDLE SHUTDOWN

    This feature automatically shuts down the engine after the machine has been in a safe idling state for an extended amount of time. The operator in the cab will be audibly and visually warned before the shutdown occurs.

    OPERATING EFFICIENCY

    Operator and job site efficiency

    IMPELLER CLUTCH TORQUE CONVERTER (ICTC) AND RIMPULL CONTROL SYSTEM (RCS)

    ICTC combined with the RCS allows the operator maximum flexibility in the modulating rimpull.

    Left brake pedal modulates rimpull from 100 to 25 percent for reduced tire slippage and wear. After 25 percent is achieved, further pedal travel applies the brake.

    RCS reduces the potential for wheel slippage without reducing the hydraulic efficiency. An in-cab switch allows the operator to set percentage of maximum rimpull to meet operating

    conditions. Four settings are available, and operators can set rimpull at 70, 80, 90 and 100 percent.

    A lock-up clutch torque converter provides direct drive efficiency which translates into improved fuel efficiency in certain applications.

    VARIABLE SHIFT CONTROL

    VSC matches transmission shifting patterns to machine application requirements, by shifting at lower engine rpms. This improves both shift quality and fuel efficiency in certain applications.

    RELIABILITY

    ENGINE

    The Cat® C18 engine with ACERT® Technology features increased horsepower and efficient fuel management for quick response, high productivity and exceptional service life. A sculptured cylinder block provides greater strength and is lighter weight.

    Combining the use of robotic welding and castings in critical high-stress areas, more than 90 percent of the 988H structure is robotically-welded to provide highly consistent welds and increased strength. Castings are also used in several areas to increase strength by helping to spread the loads and reduce the number of parts.

    FRONT FRAME AND REAR FRAME

    Highly engineered and a field-proven combination, the 988H uses high-strength plates and castings which distribute loads and increases structure robustness. A key differentiator from other manufacturers’ machines is the box-section rear frame and box-shaped loader tower. The box section absorbs torsional forces generated in a loading cycle, maintaining alignment for hitch pins and driveline. The box-shaped loader tower resists shock and torsional loads, maintaining hitch and loader linkage pin alignment, maximizing pin life.

    LINKAGE

    The 988H features the revolutionary box boom linkage design. Known for its durability, the 988H box boom linkage has high strength castings in pin joint areas that resist twisting and minimize stress. A B-pin bucket mount is placed at a height to prevent bucket healing due to better stress distribution from bucket to boom. Additionally, a four-hinge plate bucket design is utilized to increase bucket durability.

    AXLE-SHAFT, OIL DISC BRAKES

    These brakes are adjustment-free, fully hydraulic and completely sealed. Disc face grooves provide cooling even when brakes are applied for a longer component life.

    Location of the brakes allow for improved serviceability. The axle shaft brake design allows for brake service while leaving the final drive intact.

    Axle-shaft brakes require less force by operating on the low torque side of the axle. Combined with improved axle oil circulation for increased cooling, the oil-enclosed, multiple

    disc brake design improves durability.

    OPERATOR COMFORT

    BEST-IN-CLASS WORKING ENVIRONMENT

    988H has a best in-class working environment with a cab designed for optimum operator comfort, visibility and ease of operation.Ergonomic controls are fully adjustable with switches and controls located within easy reach of the operator.The interior noise levels are reduced to a quiet 72 dB(A).The Monitoring System (EMS-III) provides information on machine’s major components. There are optional features available for improved visibility. These options include a rear vision camera to clearly monitor movement behind the wheel loader and high intensity discharge (HID) lights for greater visibility at night.

    TECHNOLOGY SOLUTIONS

    CAT PRODUCT LINKTM

    Cat® Product Link enables convenient, remote monitoring of equipment. Get valuable information to keep jobs on schedule, maintain machine health and reduce fleet owning and operating costs.

    To know more click here.

    BUCKETS AND GROUND ENGAGING TOOLS

    NEW PERFORMANCE SERIES BUCKET OFFERING

    With the 988H update, Caterpillar introduces a new bucket offering ranging from 6.4 m³ (8.3 yd³) to 7.7 m³ (10 yd³). The new buckets offer design enhancements to include larger throat opening, increased floor length and improved setback angle. These design enhancements yield improved bucket fill factor and load retention in carry position.

    SPADE EDGE ROCK BUCKETS

    These buckets with bolt-on segments are available in 6.4 m³ (8.3 yd³) to 7.7 m³ (10 yd³). Each accepts up to two sets of sidebar protectors (4), featured shouldered, double-strap adapters, easily changed bolt-on segments and several tip options.

    GENERAL PURPOSE BUCKETS

    Available in 6.3 m³ (8.2 yd³) Straight Edge Rock, as well as 7.0 m³ (9.2 yd³) and 7.7 m³ (10 yd³) General Purpose configurations. The General Purpose bucket features double strap adapters and accepts two sets of sidebar protectors, bolt-on segments and tips. The General Purpose bucket is available with bolt-on cutting edge, bolt-on adapters or bolt-on adapters with segments.

    HEAVY DUTY ROCK BUCKET

    This bucket is available with a 6.4 m³ (8.33 yd³) capacity and is recommended for use in face loading where abrasion and moderate impact is encountered. This bucket features additional wear protection items including independently attached edge and adapter covers, additional liners and wear plates, one set of sidebar protectors and a thicker base edge.

    HEAVY DUTY GRANITE BUCKET

    This 6.4 m³ (8.33 yd³) capacity bucket is recommended for use in face loading where moderate abrasion and high impact is encountered. It features additional wear protection items including four sidebar protectors, thicker base edge and adapters, additional liners and wear plates and bolt-on half arrow segments.

    SERVICEABILITY

    The 988H is designed to ensure minimal downtime through ground level or platform access, grouped service points, and attention to key serviceable areas on the machine.

    • Maintain three points of contact at all times through ground level or platform accessible service areas.
    • Ground level viewable site gauges on all major systems.
    • Electrical disconnect switch and hydraulic lockout switch allow service technicians to perform maintenance while the machine stays static. Other shutdown or lockout devices includeground level engine shutdown and ground level steering hitch lock lever.
    • Longer service intervals on fluids and filters.
    • Swing-out doors on both sides of the engine compartment provide easy access to the engine oil dipstick and filler spout, S·O·SSM ports, fuel filters, air conditioner compressor,engine oil filters, alternator, starting receptacle, air filter service indicator, cooler fill and ether starting aid.
    • Maintenance-free batteries
    • Ecology drains for ease of service and prevention of spilling potential environmental contaminants. Ecology drains are standard on the hydraulic, engine, transmission and coolantsystems.
    • Centralized remote pressure taps.

    SERVICE & SUPPORT

    TIPL has trained service engineers available to provide you with the support necessary to meet your production requirements, help you maximize productivity and minimize costs.We are built to help you succeed; with parts, service support; ensuring you operate safely, sustainably, productively and profitably.

     

    SUSTAINABILITY

    PROTECTING THE ENVIRONMENT

    Cat 988H has features and services that show environmental responsibility.

    • Offers a number of fuel saving features to further lower fuel consumption, which not only benefits operating cost but reduces the 988H’s CO2 footprint.
    • First in this wheel loader size class to meet Tier 3 emissions
    • Attention has been paid to lowering routine maintenance cost while eliminating waste to the environment.
    • Built for multiple lives, the Cat 988H is one of the most rebuilt products. To maximize machine life, the machine comes wth a a number of sustainable options such as
    • Reman and Certified Rebuild programs, Retrofit packages. To know more contact TIPL.

    SAFETY

    With our commitment to safety, you can be assured that your people are protected while working in, on or around the 988 Wheel Loader. With 988H you can be assured that your people are protected while working in, on or around the 988H Wheel Loader.

    VISIBILITY

    Good visibility, whether it be positioning to the truck or watching for people and vehicles on the site, the 988H offers a number of standard and optional features to enhance job site visibility. Standard and optional features include articulated wiper/washer system with intermittent features, optional rear vision camera, optional high intensity discharge (HID) lights, optional warning beacon and optional turn signals.

    ACCESS AND EGRESS

    Getting on and off the machine is one of the leading causes of injury on a job site. The 988H has a number of features to ensure your operator gets safely on and off the 988H.

    MAINTENANCE SAFETY

    With the 988H, design efforts were taken to group service points with convenient access. All service points are at ground level or platform access to maintain three points of contact, and a number of disconnect switches are available to ensure the 988H is static during service.

    OPERATOR HEALTH AND WELL BEING

    The 988H offers many features that enhance operator comfort and aid in keeping the operator safe. In the cab, all controls are ergonomically designed for easy adjustment, low-effort and easy to reach controls minimize repetitive motion and potential strains. With a cab filtration system, low operator sound and optional features such as ride control or secondary steering, all effort has been made to protect the operators from environmental elements that can cause issues with their health or well-being.

  • 988H Wheel Loaders specalogs Click here to download













  • Service OptionsFinancing OptionsParts OptionsTraining Options

    YESNO




    captcha


For more information please call us at this number:

TOLL FREE :

1800 419 3356