D5K


  • ENGINE
    UNITS: METRIC
    Engine Model CAT C4.4 ACERT™
    Power – Net 71.6 Kw
    Power – Gross 74.5 kW
    Displacement 4400.0 cm3
    Caterpillar 71.6 kW
    ISO 9249 71.6 kW
    EEC 80/1269 71.6 kW
    SAE J1349 71.6 kW
    Bore 105.0 mm
    Stroke 127.0 mm
    TRANSMISSION
    UNITS: METRIC
    Drive Pumps 2
    Track motors 2
    Relief valve settings 47650.0 kPa
    Maximum travel speed – forward 9.0 km/h
    Maximum travel speed – reverse 10.0 km/h
    WEIGHTS
    UNITS: METRIC
    Operating Weight – XL 9408.0 kg
    Operating Weight – LGP 9683.0 kg
    SERVICE REFILL CAPACITIES
    UNITS: METRIC
    Fuel tank 195.0 L
    Crankcase and filter 11.0 L
    Final drives, XL (each side) 10.0 L
    Final drives, LGP (each side) 10.0 L
    Cooling system 22.4 L
    Transmission/hydraulic tank 59.5 L
    HYDRAULIC CONTROLS
    UNITS: METRIC
    Pump Output 73.5 L/min
    Relief valve setting 20600.0 kPa
    UNDERCARRIAGE
    UNITS: METRIC
    Shoe width – XL 510.0 mm
    Shoe width – LGP 660.0 mm
    Length of track on ground – XL 2310.0 mm
    Length of track on ground – LGP 2310.0 mm
    Track gauge – XL 1600.0 mm
    Track gauge – LGP 1750.0 mm
    Ground contact area – XL 23562.0 cm2
    Ground contact area – LGP 30492.0 cm2
    Ground pressure – XL 39.1 kPa
    Ground pressure – LGP 31.1 kPa
    Ground contact area – LGP with 770 mm (30 in) shoes 35574.0 cm2
    Ground pressure – LGP with 770 mm (30 in) shoes 27.1 kPa
    Shoe width – LGP Option 2 770.0 mm
    Track gauge – LGP with 770 mm (30 in) shoes 1860.0 mm
    RIPPER
    UNITS: METRIC
    Type Parallelogram
    Number of Shanks 3
    Maximum digging depth 337.5 mm
    Maximum reach at ground line 555.0 mm
    Maximum ground clearance under tip 448.0 mm
    Overall width 1710.0 mm
    Height 165.0 mm
    Weight 554.0 kg
    WINCH
    UNITS: METRIC
    Weight 610.0 kg
    Winch Drive Hydrostatic
    Control Hydraulic
    Speed Variable
    Winch length 705.0 mm
    Overall width 741.0 mm
    Drum diameter 254.0 mm
    Drum width 274.0 mm
    Throat clearance 171.5 mm
    Rope diameter – recommended 16.0 mm
    Rope diameter – optional 19.0 mm
    Drum capacity – recommended cable 113.0 m
    Drum capacity – optional cable 78.0 m
    Maximum line pull – bare drum 18144.0 kg
    Maximum line pull – full drum 11340.0 kg
    Maximum line speed – bare drum 40.0 m/min
    Maximum line speed – full drum 63.0 m/min
    STANDARDS
    UNITS: METRIC
    ROPS SAE J397-OCT95, SAE J1040-MAY94, ISO 3471-94, ISO 3164-95
    FOPS SAE J231-JAN81, ISO 3449-92
    BLADE
    UNITS: METRIC
    Blade width – Intermediate 2921.0 mm
    Blade width – XL 2782.0 mm
    Blade width – LGP 3220.0 mm
    Blade height – Intermediate 1010.0 mm
    Blade height – XL 1073.0 mm
    Blade height – LGP 1010.0 mm
    Blade capacity – Intermediate 2.09 m3
    Blade capacity – XL 2.19 m3
    Blade capacity – LGP 2.34 m3
    Digging depth – Intermediate 572.0 mm
    Digging depth – XL 586.0 mm
    Digging depth – LGP 572.0 mm

     

  • OPERATOR STATION

    Superior comfort keeps you productive, all day long.

    CAB

    The operator station is designed to keep operators comfortable, relaxed and productive throughout the long work shift. The D5K features:

    • Ÿ Standard air conditioning with cab option.
    • Ÿ Spacious cab with generous leg room.
    • Ÿ Fully adjustable air suspension seat with a heated seat option for cold climates.
    • Ÿ Wide door openings for getting in and out of the cab easily.
    • Ÿ Clear view to the blade corners and bottom cutting edge, especially important in fine grading, working against foundations and curbing.
    • Ÿ Operator sound level has been lowered inside the cab 4 dB(A) to an industry leading 80 dB(A)-ANSI/SAE J1166 OCT 98. This provides a quiet comfortable working environment

      reducing operator fatigue and increasing their productivity.

    SEAT-MOUNTED JOYSTICK CONTROLS

    For optimum comfort and precise control, the D5K features ergonomically designed seat-mounted controls. Seat-mounted controls isolate vibrations from the operator, and provide independent seat and controls adjustment. Individual wrist pads and armrests can be adjusted independently for optimum comfort.

    MONITORING PACKAGE

    Easy to read display provides vital system information. Buttons below the display allow the operator to select parameters for forward/reverse speed, blade response, steering response and decel pedal operation modes.

    DOZER BLADE CONTROL

    Ergonomic joystick is easy to use and reduces operator fatigue. The intuitive control makes operating the tractor easy for both new and experienced operators. The new handle shape conforms to your hand for precise blade raise and tilt control with less operator fatigue. A thumb roller controls the blade angle and requires less effort than other competitive machines. A blade shake button on top of the handle provides momentary quick tilt movement to easily remove material from the blade.

    COMBINED DECEL/BRAKE PEDAL

    Decel pedal serves combined function as engine speed control and brake. Depressing pedal through bottom of travel detent applies brake. Pedal mode can also be changed to control transmission speed with selection buttons on the display panel.

    HYDROSTATIC TRANSMISSION CONTROL

    Seat-mounted controls improve productivity.

    SPEED AND DIRECTION CONTROL

    Speed, direction and steering are all controlled with a single, easy to use joystick for less effort and lower fatigue so you can get more done. The joystick controls direction and has three simple detented positions for travel — forward, reverse and neutral. With the machine in motion, simply move the joystick in the direction you wish to move the machine. The more the joystick is moved to the right or left, the tighter the turn. Regardless of ground conditions, steering is consistent and predictable.

    INFINITELY VARIABLE SPEED CONTROL

    The speed control thumb wheel mounted on the joystick is used to infinitely increase and decrease speed, letting the operator select the optimum speed for ground and job conditions. It also eliminates power interruption when changing speeds. A speed recall button on the joystick is used to select pre-determined speed settings.

    MANEUVERABILITY

    The power turn feature lets you handle large loads around corners or through hard spots. Power turn capability improves mobility in soft underfoot conditions and is very effective on side slopes. Counter-rotation provides easy, quick maneuvering in tight areas or congested job sites.

    ENGINE

    ACERT™ technology reduces emissions, increases performance.

    C4.4 ACERT ENGINE

    The Cat® C4.4 is a 4.4 L (269 in3) displacement, four cylinder, inline configured engine equipped with a Caterpillar common rail fuel system. It uses ACERT™ Technology, a series of Caterpillar engineered innovations that provide advanced electronic control, precision fuel delivery and refined air management, resulting in outstanding performance and lower emissions. It meets the U.S. EPA Tier 3, EU Stage IIIA and Japan MOC Step 3 emissions standards.

    OUTSTANDING PERFORMANCE

    The C4.4 delivers increased horsepower, outstanding durability, reliability and improved response to change in loads, delivering power when you need it. The engine is more compact, allowing the cab to sit more forward – this improves machine balance and provides greater operator comfort. The engine and transmission control systems are integrated to optimize performance and fuel efficiency.

    UNDERCARRIAGE

    Lower owning and operating costs.

    DURABLE UNDERCARRIAGE CHOICES

    Undercarriage is a significant portion of a tractor’s owning and operating costs. Caterpillar offers two different undercarriage choices for lowest owning and operating costs for your application needs. A sealed and lubricated track (SALT) undercarriage is standard; SystemOne™ undercarriage is available as an option. Full length guarding on top of the track roller frame prevents abrasive material from falling down on moving parts.Machine balance is the key to good grading performance. Greater track length and a stable platform lead to optimum balance, allowing you to complete jobs easier and quicker with the D5K than with competitive machines.

    SYSTEMONE UNDERCARRIAGE

    With the revolutionary SystemOne undercarriage option, undercarriage maintenance time and costs are greatly reduced, lowering your costs and helping your bottom line. This innovative system uses a rotating bushing design which increases bushing life and eliminates the need for bushing turns. The rotating bushing combined with long wear life sprockets and center tread idler, increases the life and dependability of the entire system. Ideal for virtually any application or underfoot condition, the SystemOne undercarriage also features significantly less vibration for a better, more comfortable ride.

    SEALED AND LUBRICATED TRACK (SALT) UNDERCARRIAGE

    The standard sealed and lubricated track (SALT) undercarriage is built for long life in rugged conditions. Segmented sprockets are easy to replace and less expensive than replacing the complete sprocket hub.

    CHOICE OF TRACK FRAME CONFIGURATIONS

    Track frames are available in extra long (XL) or low ground pressure (LGP) configurations. XL undercarriage provides increased ground contact area and flotation, superior balance and excellent finish grading. In addition, the LGP version also features a wider track shoe, increasing ground contact area for optimum flotation and stability on sloping and finish grading jobs. As an additional choice, the LGP undercarriage on the D5K is available with 762 mm (30 in) shoes.

    ACCUGRADE™ SYSTEMS

    Grade with increased accuracy.

    GRADE CONTROL SYSTEMS

    Caterpillar is revolutionizing the way to move material with new technology solutions for earthmoving machines – solutions that provide greater accuracy, higher productivity, lower operating costs and greater profits. The AccuGrade System is designed and integrated into the machine and hydraulic systems to create an automated blade control system that allows operators to grade with increased accuracy. The system uses machine-mounted sensors to calculate precise blade slope and elevation information.

    ACCUGRADE LASER

    AccuGrade Laser uses a laser transmitter and receiver for precise grade control. A laser transmitter on the worksite creates a constant grade reference over the work area. A digital laser receiver mounted on the machine captures the laser signal. The system calculates the blade adjustments necessary to achieve grade, makes automatic elevation adjustments typically performed by the operator and provides automatic blade control. The operator simply steers the machine. Automated blade control lets you achieve grade faster and in fewer passes, reducing the need for traditional survey stakes or grade checkers. The system also calculates cut/fill requirements for manual blade control. Work is completed faster, more accurately and with less manpower. AccuGrade Laser is well suited for flat work such as concrete pads and driveways.

    ACCUGRADE GPS

    AccuGrade GPS computes the machine positioning information and compares the position of the blade relative to the design plan. Information is provided to the operator via an in-cab display showing blade elevation, necessary cut/fill to achieve grade, blade position on the design surface and a graphical view of the design plan with machine location. AccuGrade GPS puts all the information the operator needs to complete the job in the cab for a greater level of control. Vertical and horizontal guidance tools visually guide the operator to the desired grade. Automated features allow the hydraulic system to automatically control blade adjustments to move the blade to grade. The operator simply uses the light bars to guide the machine for consistent, accurate grades and slopes, increasing productivity with less fatigue. AccuGrade GPS is best used for cut and contour jobs.

    ACCUGRADE MONITOR

    Caterpillar is the first to integrate this system and its monitor into the machine’s dash for easy viewing during operation. The AccuGrade monitor is conveniently located, allowing the operator to view system information while keeping a straight line of sight to the blade corners.

    BLADE AND ATTACHMENTS

    Cat work tools can handle tough dozing applications.

     

    VPAT BLADE

    The VPAT blade is specifically designed for finish grading, backfilling ditches, cutting V ditches, windrowing, fill spreading, medium land clearing and heavy dozing. Built for rugged strength and durability, this 6-way blade allows for adjustable angle, tilt and pitch. Visibility to the blade corners and cutting edge is improved. This is especially critical when working near curbs and foundation structures.

    PARALLELOGRAM RIPPER

    The aggressive parallelogram ripper lets you do more productive ripper work. The parallel linkage design provides better penetration and maneuverability in tight working areas.

    FORESTRY OPTIONS

    An easier way to work in the woods. The D5K is available with the following features to aid in forestry applications:

    • Ÿ Forestry blade, featuring additional guarding to protect the tractor from debris and to provide increased blade productivity
    • Ÿ Cat hydrostatic winch, featuring excellent line pull at any speed and infinitely variable drum speed
    • Ÿ Heavy-duty rear tank guard.

    HYDROSTATIC WINCH

    Infinitely variable speed control.

    OUTSTANDING CONTROL

    The Cat hydrostatic winch offers outstanding control of the load with infinitely variable modulation of speed and pull. Mechanical winches force the operator to choose the gear ratio of the winch. The Cat hydrostatic winch eliminates this compromise by providing the speed of a standard winch and the pull of a low speed winch, all in one package. The result is:

    • Ÿ Excellent line pull at any spee
    • Ÿ Infinitely variable drum spee
    • Ÿ Unmatched load control

    SERVICEABILITY

    Easy access and minimal maintenance requirements keep your machine on the job.

    EASY ACCESS

    Long service intervals and easy maintenance keep the machine up and running and lower your owning and operating costs. A large, hinged door on the left side of the engine compartment provides easy access to all regular engine maintenance points, including engine fuel filters and water separator, the engine oil filter, the engine oil dipstick and filler, the fuel priming pump and the engine air pre-cleaner and filters. Grouped pressure taps allow for quick testing and troubleshooting of the hydraulic system. The hydraulic filters are all located in the left rear service compartment and are accessible from ground level.

    PRODUCT LINK

    The optional Product Link system simplifies equipment fleet tracking. Using satellite or cellular technology, the system automatically reports information such as location, machine hours, active and logged service codes and security alarms.

    MACHINE SECURITY SYSTEM

    An optional Machine Security System (MSS) that utilizes a programmable key system that deters theft, vandalism and unauthorized usage. MSS uses electronically coded keys selected by the customer to limit usage by individuals or time parameters.

    CUSTOMER SUPPORT

    Unmatched support makes the difference.

    DEALER SERVICES

    Your Cat dealer is ready to assist you with your purchase decision and everything after.

    • Ÿ Make detailed comparisons of machines, with estimates of component life, preventative maintenance and cost of production
    • Ÿ Financing packages are flexible to meet your needs
    • Ÿ For more information on Cat products, dealer services and industry solutions, visit us at www.cat.com.

  • D6R TRACK TYPE TRACTORS specalogs Click here to download













  • Service OptionsFinancing OptionsParts OptionsTraining Options

    YESNO




    captcha


For more information please call us at this number:

TOLL FREE :

1800 419 3356