320D2 GC


  • ENGINE

    Engine Model Cat 4.4 AcertTM
    Engine Power – ISO 14396 93 kW – 125 hp
    Net Power – SAE J1349/ISO 9249 85 kW – 114 hp
    Bore 105 mm – 4.13 in
    Stroke 127 mm – 5.00 in
    Displacement 4.4 L – 269 cu.in
    The 320D2 GC meets U.S. EPA Tier 3/EU Stage IIIA equivalent and China III Non road emission standards.
    No engine power derating required below 4000 m (13,120 ft) altitude.
    Net power advertised is the power available at the flywheel when the engine is equipped with fan, air cleaner, muffler and alternator.
    Rating at 1,800 rpm.

    WEIGHTS

    Operating Weight (ISO 6016)
    Standard Undercarriage
    Minimum Operating Weight
    20200 kg – 44500 lb
    *5.7m (18’8″) Reach Boom, R2.9 (9’6″) Stick, 600 mm (24″) Triple Grouser Shoes, 1.0 cu.m GD Bucket

    SWING MECHANISM

    Swing Speed 11.9 rpm – 11.9 rpm
    Swing Torque 61.8 kN.m – 45.581 lbf-ft

    DRIVE

    Maximum Travel Speed 3.6/5.8 km/h – 2.2/3.6 mph
    Maximum Drawbar Pull 206 kN – 46,311 lb

    WORKING RANGES

    All dimensions are approximate.
    All dimensions are approximate.
    Reach Boom 5.7 m (18’8″”), R2.9B1 (8’2″”) Stick, 1.0 cu.m. GD Bucket
    Boom Options Reach Boom
    5.7 m (18’8″)
    Stick Options R2.9B1 (9’6″)
    Bucket Type/Capacity UD
    0.9 m3 (1.17 yd3)
    Bucket Tip Radius 1490 mm (4’11”)
    1 Maximum Digging Depth 6640 mm (21’9″)
    2 Maximum Reach at Ground Line 9780 mm (32’1″)
    3 Maximum Loading Height 6570 mm (21’7″)
    4 Minimum Loading Height 2250 mm (7’5″)
    5 Maximum Depth Cut for 2240 mm (8 ft): Level Bottom 6470 mm (21’3″)
    6 Maximum Vertical Wall Digging Depth 6010 mm (19’9″)
    Bucket Digging Force (SAE) 132 kN (29,700 lbf)
    Bucket Digging Force (ISO) 147 kN (33,000 lbf)
    Stick Digging Force (SAE) 105 kN (23,600 lbf)
    Stick Digging Force (ISO) 108 kN (24,300 lbf)

    HYDRAULIC SYSTEM

    Main System – Maximum Flow (Total) 428 L/min – 113.1 gal/min
    Maximum Pressure – Equipment 35 000 kPa – 5,076 psi
    Maximum Pressure – Swing 25 000 kPa – 3,626 psi
    Pilot System – Maximum Flow 23.1 L/min – 6.1 gal/min
    Pilot System – Maximum Pressure 3900 kPa – 566 psi
    Boom Cylinder – Bore 120 mm – 4.7 in
    Boom Cylinder – Stroke 1260 mm – 49.6 in
    Stick Cylinder – Bore 140 mm – 5.5 in
    Stick Cylinder – Stroke 1504 mm – 59.2 in
    Bucket Cylinder – Bore 120 mm – 4.7 in
    Bucket Cylinder – Stroke 1104 mm – 43.5 in

    SERVICE REFILL CAPACITIES & CHANGE INTERVALS*

    Fuel Tank Capacity 410 L – 108.3 gal – NA
    Cooling System 25 L – 6.6 gal – 6000 Hrs
    Engine Oil (with filter) 16 L – 4.2 gal – 500 Hrs
    Swing Drive (each) 8 L – 2.1 gal – 1000 Hrs
    Final Drive (each) 8 L – 2.1 gal – 2000 Hrs
    Hydraulic System (including tank) 260 L – 68.7 gal – NA
    Hydraulic Tank 138 L – 36.5 gal – 6000 Hrs
    *Change Intervals are subject to periodic S•O•SSM & following of Standard Maintenace Procedures

    SERVICE REFILL CAPACITIES & CHANGE INTERVALS*

    Fuel Tank Capacity 410 L – 108.3 gal – NA
    Cooling System 25 L – 6.6 gal – 6000 Hrs
    Engine Oil (with filter) 16 L – 4.2 gal – 500 Hrs
    Swing Drive (each) 8 L – 2.1 gal – 1000 Hrs
    Final Drive (each) 8 L – 2.1 gal – 2000 Hrs
    Hydraulic System (including tank) 260 L – 68.7 gal – NA
    Hydraulic Tank 138 L – 36.5 gal – 6000 Hrs
    *Change Intervals are subject to periodic S•O•SSM & following of Standard Maintenace Procedures

    DIMENSION – REACH BOOM 5.7M (18’8″) HD, R2.9B1M (8’2″) STICK, TRACK SHOES 600MM (24″)
    (All dimensions are approximate.)

    REACH BOOM 5.7 M (18’8″), R2.9B1 (8’2″) STICK, 1.0 CU.M GD BUCKET
    1 Shipping Height* 3030 mm (9’11”)
    2 Shipping Length 9460 mm (31’0″)
    3 Tail Swing Radius 2750 mm (9’0″)
    4 Length to Center of Rollers 3270 mm (10’9″)
    5 Track Length 4080 mm (13’5″)
    6 Ground Clearance 450 mm (1’6″)
    7 Track Gauge 2200 mm (7’3″)
    8 Transport Width 2800 mm (9’2″)
    9 Cab Height 2950 mm (9’8″)
    10 Counterweight Clearance** 1020 mm (3’4″)

  • ENGINE

    Cat C4.4 ACERT engine
    Meets U.S. EPA Tire 3/EU Stage IIIA equivalent
    L4 Droop with Underspeed Control
    Automatic Engine Control
    Electric Priming Pump

    CAT ACCUGRADETM GRADE CONTROL SYSTEM

    Depth and Slope
    AccuGradeTM Grade Control System simplifies digging, improves accuracy, increases productivity, minimizes material usage, and lowers operating costs.
    Work Confidently. Stay on Grade (Do it once. Do it Right. All Day. Everyday.)

    PRODUCT LINKTM

    Helps to take the guesswork out of equipment management. When you know where your equipment is, what it’s doing and how it’s performing, you can maximize your efficiency and lower your operation costs.
    Product Link helps you get that information to the right people – at right time
    Comprehensive Remote Fleet Management and Timely Maintenance Management
    User-friendly dashboard, customizable user alerts & displays
    Robust mapping & site boundary management”

    JOB-READY FOR 2D APPLICATION

    AccuGradeTM Grade Control System helps you to be more productive in number of applications.

  • 320D2 GC Hydraulic Excavators specalogs Click here to download














  • Service OptionsFinancing OptionsParts OptionsTraining Options

    YESNO




    captcha


For more information please call us at this number:

TOLL FREE :

1800 419 3356