216B Series 3


  • ENGINE UNITS: METRIC
    Engine Model Cat® C2.2
    Gross Power SAE J1995 38 kW 51 hp
    Net Power SAE 1349/ISO 9249 35 kW 47 hp
    Displacement 2.2 L 134 in3
    Stroke 100 mm 3.9 in
    Bore 84 mm 3.3 in
    WEIGHTS*
    Operating Weight 2,581 kg 5,690 lb
    POWER TRAIN
    Travel Speed (Forward or Reverse) 12.7 km/h 7.9 mph
    HYDRAULIC SYSTEM
    Hydraulic Flow – Standard
    3,335 psi
    Loader Hydraulic Pressure 23000 kPa 16 gal/min
    Loader Hydraulic Flow 61 L/min 31.1 hp
    Hydraulic Power (calculated) 23.2 kW
    OPERATING SPECIFICATIONS*
    Rated Operating Capacity 635 kg 1,400 lb
    Related Operating Capacity with Optional Counter weight 680 kg 1,500 lb
    Tipping Load 1,270 kg 2,800 lb
    Breakout Force, Tilt Cylinder 1,852 kg 4,083 lb
    CAB
    ROPS SAE J1040 MAY94, ISO3471:1994
    FOPS SAE J/ISO 3449 APR98 Level I, ISO 3449:1992 Level I
    FOPS Level II SAE J/ISO 3449 APR98 Level II, ISO 3449:1992 Level II (optional)
    SERVICE REFILL CAPACITIES
    Chain Box, each side 6 L 1.6 gal
    Coolnig System 10 L 2.6 gal
    Engine Crankcase 10 L 2.6 gal
    Fuel Tank 58 L 15.4 gal
    Hydraulic System 55 L 14.5 gal
    Hydraulic Tank 35 L 9.2 gal
    DIMENSIONS*
    1. Wheel Base 986 mm 39 in
    2. Length w/o Bucket 2519 mm 99 in
    3. Length w/Bucket on Ground 3233 mm 127 in
    4. Height 1950 mm 77 in
    5. Maximum Overall Height 3709 mm 146 in
    6. Bucket Pin Height at Maximum Lift 2854 mm 112 in
    7. Bucket Pin Height at Carry Position 200 mm 8 in
    8. Reach at Maximum Lift and Dump 505 mm 20 in
    9. Clearance at Maximum Lift and Dump 2169 mm 85.4 in
    10. Ground Clearance 195 mm 8 in
    11. Departure Angle 26
    12. Bumper Overhang Behind rear Axle 967 mm 38 in
    13. Maximum Dump Angle 40
    14. Vehicle Width over Tires 1525 mm 60 in
    15. Turning Radius from Center – Machine Rear 1502 mm 59 in
    16. Turning Radius from Center – Coupler 1195 mm 47 in
    17. Turning Radius from Center – Bucket 1944 mm 77 in
    18. Maximum Reach w/Arms Parallel to Ground 1291 mm 51 in
    19. Rack Back Angle at Maximum Height 81

  • The Cat 216B Series 3 Skid Steer Loader, with its radial lift design, delivers excellent digging performance with outstanding drawbar power. The 216B Series 3 features the following:

    • Ergonomic operator station features easy to use pilot operated joystick controls for reduced operator fatigue and increased productivity.
    • High performance power train provides high engine horsepower and torque, allowing part-throttle operation for lower sound levels and fuel consumption.
    • Advanced hydraulic system is designed for maximum power and reliability.
    • Easy routine maintenance helps reduce machine downtime for greater productivity.
    • Broad range of performance matched Cat Work Tools make the Cat Skid Steer Loader the most versatile machine on the jobsite.

    Operating weight, Operating Specifications and Dimensions all based on 75 kg (165 lb) operator, all fluids, OROPS, 1524 mm (60 in) dirt bucket, Cat 10 x 16.5 tires, no optional weights and manual quick coupler (unless otherwise noted).

    MANDATORY EQUIPMENT

    • Quick Coupler, Mechanical or Hydraulic
    • Seat Belt, 50 mm (2 in) or 75 mm (3 in)
    • EU Preparation Package (Europe only)

    COMFORT PACKAGE (must select one of the following)

    • Open ROPS (CO): Static Seat
    • Open ROPS (C1): Suspension Seat, Deluxe Headliner
    • Enclosed ROPS (C2): C1 + Heater, Cab Door, Side Windows, Cup Holder, Cab Debris Barrier

    CONTROL PACKAGE (must select one of the following)

    • Control Package 1: On/Off Auxiliary Hydraulics Basic
    • Control Package 2: Proportional Auxiliary Hydraulics Deluxe
    • Control Package 3: Proportational Auxiliary Hydraulics Deluxe, Work Tool Harness

    STANDARD EQUIPMENT

    ELECTRICAL

    • 12 volt Electrical System
    • 65 ampere Alternator
    • Automatic Glow Plug Activation
    • Ignition Key Start/Stop switch
    • Lights: Gauge Back Lighting, Two Adjustable Front and Rear Halogen Lights, Dome Light

    OPERATOR ENVIRONMENT

    • Gauges: Fuel Level, Hour Meter
    • Operator Warning System Indicators: Air Filter Restriction, Alternator Output, Armrest Raised/Operator Out of Seat, Engine Coolant Temperature, Engine Oil Pressure, Glow Plug Activation, Hydraulic Filter Restriction, Hydraulic Oil Temperature, Parking Brake Engaged
    • Vinyl Seat
    • Pull Down Ergonomic Contoured Armrest
    • Control Interlock System, when operator leaves seat or armrest raised: Hydraulic System Disables, Hydrostatic Transmission Disables, Parking Brake Engages
    • ROPS Cab, Open, Tilt Up
    • FOPS, Level I
    • Top and Rear Windows
    • Floor Mat
    • Interior Rear View Mirror
    • 12 volt Electric Socket
    • Horn
    • Backup Alarm

    POWER TRAIN

    • Cat C2.2 Tier 4 Interim/Stage IIIA Compliant Diesel Engine
    • Air Cleaner, Dual Element, Radial Seal
    • S•O•SSM Sampling Valve, Hydraulic Oil
    • Filters: Spin on, Hydraulic
    • Filters: Bayonet-type, Fuel and Water Separator
    • Tilt Up Radiator / Hydraulic Oil Cooler
    • Muffler, Standard
    • Spring Applied, Hydraulically Released Parking Brakes
    • Hydrostatic Transmission
    • Four Wheel Chain Drive

    OTHER

    • Engine Enclosure, Lockable
    • Extended Life Antifreeze, – 36 C (-33 F)
    • Machine Tie Down Points (4)
    • Support, Lift Arm
    • Hydraulic Oil Level Sight Gauge
    • Radiator Coolant Level Sight Gauge
    • Radiator, Expansion Bottle
    • Cat Tough Guard TM Hose
    • Auxiliary, Hydraulics, Continuous Flow
    • Heavy Duty, Flat Faced Quick Disconnnects
    • Split D-Ring to Route Work Tools Hoses Along Side to Left Lift Arm
    • Electrical Outlet, Beacon
    • Belly Pan Cleanout

    OPTIONAL ATTACHMENTS

    • Counter weight, increases rated operatiing capacity 45 kg (100 lb)
    • Variable Speed Demand Fan (not available in all regions)
    • Beacon, Rotating
    • Engine Block Heater – 120V or 240V
    • Oil, Hydraulic, Cold Operation
    • Paint, Custom
    • Heavy Duty Battery, 880 CCA

  • 216B Series 3 specalogs. Click here to download













  • Service OptionsFinancing OptionsParts OptionsTraining Options

    YESNO




    captcha


For more information please call us at this number:

TOLL FREE :

1800 419 3356