621H


  • ENGINE
    UNITS: METRIC
    Max. Power 304.0 kW
    Tractor Cat® C13 ACERT™
    TRACTOR ENGINE
    UNITS: METRIC
    Flywheel Power: Tractor/Scraper 304 kW (407 hp)
    SCRAPER BOWL
    UNITS: METRIC
    Scraper Capacity: Heaped 18.3 m3
    Rated Load 26127.0 kg
    Heaped Capacity 18.3 m3
    Maximum Apron Closure Force 225.0 kN
    Maximum Apron Opening 1767.0 mm
    Maximum Depth of Cut 315.0 mm
    Maximum Depth of Spread 540.0 mm
    Maximum Ground Clearance at Cutting Edge 594.0 mm
    Maximum Hydraulic Penetration Force 580.0 kN
    Struck Capacity 13.0 m3
    Thickness of Cutting Edge 22.0 mm
    Width of Cut, Outside Router Bits 3136.0 mm
    TRANSMISSION
    UNITS: METRIC
    Top Speed (Loaded) 53.9 km/h
    1 Forward 5.0 km/h
    2 Forward 8.9 km/h
    3 Forward 12.1 km/h
    4 Forward 16.3 km/h
    5 Forward 21.9 km/h
    6 Forward 29.6 km/h
    7 Forward 39.9 km/h
    8 Forward 53.9 km/h
    Reverse 9.2 km/h
    HYDRAULICS
    UNITS: METRIC
    Cushion Hitch Circuit Flow 40.1 L/min
    Cushion Hitch Cylinder Bore 140.0 mm
    Cushion Hitch Cylinder Stroke 251.0 mm
    Push/Pull Bail Cylinder Bore 90.0 mm
    Push/Pull Bail Cylinder Stroke 415.0 mm
    Scraper Circuit Flow 250.0 L/min
    Secondary Steering Circuit Flow 39.0 L/min
    Steering Circuit Flow 234.0 L/min
    Steering Cylinder Bore 127.0 mm
    Steering Cylinder Stroke 1128.0 mm
    Bowl Cylinder Bore 140.0 mm
    Bowl Cylinder Stroke 845.0 mm
    Apron Cylinder Bore 150.0 mm
    Apron Cylinder Stroke 565.0 mm
    Ejector Cylinder Bore 140.0 mm
    Ejector Cylinder Stroke 1550.0 mm
    STEERING
    UNITS: METRIC
    Steering Angle – Right 85⁰
    Steering Angle – Left 82⁰
    SERVICE REFILL CAPACITIES – TRACTOR
    UNITS: METRIC
    Engine Crankcase 33.0 L
    Windshield Washer Reservoir 5.0 L
    Transmission 70.0 L
    Differential 173.0 L
    Final Drive (per side) 19.0 L
    Cooling System 64.0 L
    Hydraulic Reservoir 83.0 L
    SERVICE REFILL CAPACITIES – SCRAPER
    UNITS: METRIC
    Fuel Tank 763.0 L
    Non-Powered Wheel 4.0 L
    STANDARDS
    UNITS: METRIC
    Standards Standards
    TRACTOR ENGINE – U.S. EPA TIER 4 INTERIM/EU STAGE IIIB
    UNITS: METRIC
    Bore 130.0 mm
    Displacement 12.5 L
    Max. Power (All Gears) (ISO 14396) 304.0 kW
    Max. Power Reference Engine Speed 1700.0 RPM
    Stroke 157.0 mm
    Tractor Engine Cat® C13 ACERT™
    TRACTOR ENGINE – PRIOR U.S. EPA TIER 3/EU STAGE IIIA CONFIGURATION*
    UNITS: METRIC
    Bore 130.0 mm
    Displacement 12.5 L
    Max. Power (All Gears) (ISO 14396) 304.0 kW
    Max. Power Reference Engine Speed 1700.0 RPM
    Stroke 157.0 mm
    Tractor Engine Cat® C13 ACERT™
    WEIGHTS – MACHINES MEETING U.S. EPA TIER 4 INTERIM/EU STAGE IIIB EMISSION STANDARDS
    UNITS: METRIC
    Push-Pull – Loaded, based on a rated load 63567.0 kg
    Push-Pull – Operating Weight – full fuel tanks 37440.0 kg
    Push-Pull – Shipping Weight – 10% fuel 36782.0 kg
    Standard – Loaded, based on a rated load 62312.0 kg
    Standard – Operating Weight – full fuel tanks 36185.0 kg
    Standard – Shipping Weight – 10% fuel 35507.0 kg
    WEIGHTS – MACHINES ACHIEVING PRIOR U.S. EPA TIER 3/EU STAGE IIIA EMISSION LEVELS
    UNITS: METRIC
    Push-Pull – Loaded, based on a rated load 63320.0 kg
    Push-Pull – Operating Weight – full fuel tanks 37193.0 kg
    Push-Pull – Shipping Weight – 10% fuel 36515.0 kg
    Standard – Loaded, based on a rated load 62065.0 kg
    Standard – Operating Weight – full fuel tanks 35938.0 kg
    Standard – Shipping Weight – 10% fuel 35260.0 kg

     

  • OPERATOR’S STATION

    Ergonomically designed for all-day comfort, control and productivity.

    ERGONOMIC LAYOUT

    The all new H Series operator station is ergonomically designed for total machine control in a comfortable, productive and safe environment. All controls, levers, switches and gauges are positioned to maximize productivity and facilitate a reduction in operator fatigue.

    VIEWING AREA

    Designed for excellent all-around visibility and clear sight lines to the job site, the large viewing area offers exceptional visibility to the front of the machine as well as to the cutting edge. The air conditioning unit has been relocated to beneath the cab, allowing the operator enhanced visibility.

    POWER TRAIN – ENGINE

    The Cat® C13 ACERT™ engine is built for power, reliability and efficiency.

    ACERT TECHNOLOGY

    The Cat® C13 ACERT™ engine continues the evolutionary, incremental improvements that provide breakthrough engine technology built on systems and components developed by Caterpillar with proven reliability. The engine is available with either U.S. EPA Tier 3/EU Stage IIIA equivalent emission configurations or U.S. EPA Tier 4 Interim/EU Stage IIIB certified emission configurations to meet the needs of contractors around the world.

    EMISSIONS

    Machines equipped with engines meeting U.S. EPA Tier 4 Interim/EU Stage IIIB emission standards are equipped with a Cat Clean Emission Module to deliver the performance and efficiency that customers demand while meeting emission requirements. Machines equipped with the U.S. EPA Tier 3/EU Stage IIIA equivalent engines are equipped with a muffler in place of the Cat Clean Emission Module.

    CAT CLEAN EMISSION MODULE (CEM)

    CEM is an exhaust aftertreatment package consisting of a diesel particulate filter, and control systems. The CEM reduces particulate emissions using passive and active regeneration during normal engine operation.

    CAT NOX REDUCTION SYSTEM (NRS)

    The Cat NOx Reduction System (NRS) captures and cools a small quantity of exhaust gas, then routes it into the combustion chamber where it drives down combustion temperatures and reduces NOx emissions.

    DIESEL PARTICULATE FILTER REGENERATION

    Regeneration is the removal of soot from the Diesel Particulate Filter (DPF). The Aftertreatment Regeneration Device (ARD) is used to regenerate the DPF. The DPF traps both particulates and ash, the ash is removed at regular service intervals.

    POWER TRAIN – TRANSMISSION

    More power to the ground for greater productivity.

    ELECTRONIC TRANSMISSION

    The Cat eight-speed forward one-speed reverse Electronic Clutch Pressure Controlled (ECPC) transmission features enhanced shift control logic with anti-hunt shift strategy for speed continuity, and to ensure constant shift times.

    • Tractor gears 1-2 – converter drive for increased torque, gears 3-8 – direct-drive for drive train efficiency. Scraper gears use converter drive for more torque in the cut.
    • Transmission Hold maintains converter drive for maximum rimpull or holds current gear for best control.
    • Programmable Top Gear manually sets top gear available (3rd-8th) to match conditions or speed.
    • Neutral Coast Inhibitor prevents transmission shifts into neutral while moving.

    SMOOTH TRANSMISSION GEAR SHIFTING

    The 621H features ECPC Shift Torque Management (STM), with improved Shift Control Logic (SCL) and Part Throttle Shifting (PTS). These features allow smoother shifting and greater acceleration on grades while torque is maintained through the shift changes. SCL also provides automatic shift selection that is more specific to the desired machine operation, and downshifts when needed for maximum acceleration when increased throttle is applied. PTS allows shifting at lower speeds during part throttle operation, resulting in improved part throttle fuel economy, quieter machine operation, and better maneuvering in reduced speed operating conditions.

    BRAKE PERFORMANCE

    The 621H uses hydraulically-actuated wet disc brakes for exceptional brake performance. The standard Cat Engine Brake reduces brake wear and enhances machine control.

    STRUCTURES

    Superior design and construction delivers long term durability.

     

    CUSHION HITCH

    Electronically actuated with parallelogram-type linkage for exceptional strength, with two nitrogen accumulators (4) using free-floating pistons (8) to deliver a smooth ride for enhanced operator comfort and machine durability.

    • Controlled oil flow (6) dampens rebound oscillation
    • Leveling valve (7) applies pressure via an orifice (5) to automatically center the piston in load cylinder (1)
    • Steel castings are used to eliminate many welded joints and increase strength
    • Double-kingbolt design (2, 3) withstands high external forces, simplifies installation and removal

    LOCKOUT SWITCH

    An operator-selectable lockout switch, located on the joystick, locks the cushion hitch down for improved control of the cutting edge during loading and dumping.

    NITROGEN ACCUMULATOR

    Vertically mounted hydraulic cylinder transfers road shocks to nitrogen accumulators. Nitrogen accumulator absorbs and dampens road shocks, thus preventing the loads from being transmitted to the hitch components or to the operator.

    NON-METALLIC FENDERS AND FUEL TANK

    The new fuel tank is made of recyclable roto-milled polyethylene and keeps the fuel cleaner with controlled filtration and cleanout access ports. The new capacity of the new fuel tank has been increased, providing operators with 10 plus hour shifts depending on engine load factors. The new tractor fenders are made of the same highly durable, roto-milled polyethylene. The non-metallic fenders prevent material buildup when operating in sticky materials.

    SCRAPER BOWL

    Caterpillar designed and built for rugged performance and reliability.

    REDESIGNED BOWL

    The 621H uses a new bowl design than enhances productivity through a 9% increase in bowl capacity over previous models. The low profile design offers low resistance to incoming materials, while cellular constructions adds strength and dent resistance to the bowl sides and floor.

    HYDRAULIC LINES PROTECTION

    Hydraulic lines durability is increased by routing them through the bowl sidewalls where they are protected from damage on the job site.

    EJECTION SYSTEM

    The powerful ejection system provides constant spreading control while minimizing carryback material. An overflow guard on the ejector helps retain material and keep it from spilling over onto the rear of the scraper.

    CUTTING EDGES AND CAT GROUND ENGAGING TOOLS (GET)

    A variety of Ground Engaging Tools (G.E.T.) options are available to optimize the machine for different material types and loading conditions. GET options include standard, serrated, and abrasion resistant material (ARM). Most are reversible to provide long life and reduced operating costs.

    LOADING OPTIONS

    Flexible loading options to adapt to changing job site conditions.

     

    PUSH-LOADING

    To achieve maximum productivity, the 621H should be push-loaded with a D8- or D9-size Track-Type Tractor.

    PUSH-PULL

    The push-pull arrangement is recommended for applications that require a large amount of material to be moved very quickly at low cost per bank cubic meter (bank cubic yard). The push-pull arrangement concentrates the combined power of two machines onto one cutting edge. Push-pull scrapers work in pairs where the lead scraper is pushed through the cut by the trailing scraper. When the lead scraper is fully loaded, the trailing scraper lowers its bowl and is pulled through the cut by the lead scraper. The result is a self-loading system. The push-pull arrangement features a hydraulically-actuated bail and cushioned plate, which are bolted to the front of the tractor, and a hook that is attached to the rear of the scraper. Working together, push-pull scrapers can provide the lowest cost per meter (yard) for many applications. As a single-engine machine, the 621H push-pull arrangement is recommended for easy loading application with well maintained haul roads and grades of +5% or less.

    INTEGRATED TECHNOLOGIES

    Technology options to improve operator comfort and increase productivity.

     

    SEQUENCE ASSIST

    Sequence Assist uses integrated software and position-sensing cylinders to automate many of the tasks an operator performs when loading, hauling and dumping. The operator simply sets preferences for bowl and apron height and subsequently pushes a button to ready the machine for loading, then hauling, then dumping, and then the return to cut. The system automatically sets the cushion hitch, bowl height, apron, and ejector. Sequence Assist comes with a convenient load counter for tracking material moved. With Sequence Assist, up to 14 individual implement and machine commands are replaced by four touches of a button, allowing the operator additional time to prepare for the loading cycle and observation of the job site.

    LOAD ASSIST

    Load Assist builds on Sequence Assist by loading the bowl with the push of a button. As the machine enters the cut, the operator can activate Load Assist so the system takes over control of the cutting edge height, limiting tire spin based on integrated sensors and GPS technology to ensure consistent and full bowl loads. The operator is responsible only for the throttle, steering, and operating the apron. Load Assist helps make inexperienced operators productive very quickly.

    CAT GRADE CONTROL

    Cat Grade Control is an automatic system that helps you control costs by moving the maximum amount of material with the prime earthmover which often provides the lowest cost per unit of material moved. Using satellite positioning technology, the automatic system ensures cut protection by limiting how deep the scraper will dig. The optional system is available from the factory and fully integrated into the machine and works seamlessly with Sequence Assist and Load Assist. Additional benefits of Cat Grade Control include putting the site plan in front of the operator for increased efficiency and elimination of rework and using the scraper for site mapping.

    WORK AREA VISION SYSTEM (WAVS)

    Cameras on the machine provide views of the cutting edge, right side and rear. The system enhances safety and provides a new way to see the cutting edge during loading and to see to the rear of the machine when performing push-load or push-pull work with another scraper.

    COMPLETE CUSTOMER SUPPORT

    Cat® dealer services help you operate longer with lower costs.

    SELECTION

    Make comparisons of the machines you are considering before you buy. Your Cat® dealer can help.

    PURCHASE

    Consider the resale value, compare productivity and day-to-day operating costs and fuel consumption.

    OPERATION

    For the best operating techniques to increase productivity and your profit, turn to your Cat dealer for the latest training literature and trained staff.

    MAINTENANCE

    Repair option programs guarantee the cost of repairs up front. Diagnostic programs such as S·O·SSM and Technical Analysis help you avoid unscheduled repairs.

    REPLACEMENT

    Repair or rebuild? Your Cat dealer can help you evaluate the costs so you can make the right choice.

    PRODUCT SUPPORT

    Your local Cat dealership will be with you every step of the way with its unsurpassed worldwide parts support, trained technicians and customer support agreements.

    SAFETY

    Safety is an integral part of all machine and system designs.

    POWERED ACCESS LADDER

    A new powered access system option significantly reduces the effort required to climb into the cab. The system is a solid, stable angled ladder that folds out from underneath the cab. It is activated from a keypad located behind a service door at ground level. Controls are also located in the cab on a keypad. The ladder provides a rigid and angled base of support for easier climbing and descent. For added safety, the steps are illuminated by LED lights. An actuator under the cab operates the step. When not in use, the ladder retracts under the cab. An audible alarm sounds if the machine moves while the ladder is down. If power fails on the machine, the operator can raise or lower the steps manually using a lever inside the cab or outside next to the ladder’s top step.

    ACCESS AND EGRESS

    Handrails and grab irons are provided for safe and secure entrance and exit of the cab as well as for performing daily maintenance.

    WORK AREA VISION SYSTEM (WAVS)

    Cameras on the machine provide views of the cutting edge, right side and rear. The system enhances safety and provides a new way to see the cutting edge during loading and to see to the rear of the machine when performing push-load or push-pull work with another scraper

  • 621H Scrapers specalogs Click here to download













  • Service OptionsFinancing OptionsParts OptionsTraining Options

    YESNO




    captcha


For more information please call us at this number:

TOLL FREE :

1800 419 3356