120K2


  • ENGINE
    UNITS: METRIC
    Base Power (1st gear) Net 108.0 Kw
    Engine Model Cat C7 ACERT
    Bore 110.0 mm
    Derating altitude 2286.0 m
    Displacement 7.2 L
    Fan Speed Maximum 1,575 rpm
    Gross Power ISO 14396 116.0 kW
    High Ambient Capability 50.0 C
    Maximum Torque Net 774.0 Nm
    Number of cylinders 6
    Power All Gears: 1-8 Gross 118.0 kW
    Power All Gears: 1-8 Gross (metric) 118.0 kW
    Power All Gears: 1-8 Net 108.0 kW
    Power All Gears: 1-8 Net (metric) 108.0 kW
    Speed @ rated power 2,000 rpm
    Stroke 127.0 mm
    Torque Rise 50%
    POWER TRAIN
    UNITS: METRIC
    Brakes Parking Air actuated, multiple oil-disc
    Brakes Secondary Dual Circuit
    Brakes Service Air actuated, multiple oil-disc
    Brakes Service, surface area 18606.0 cm2
    Forward/Reverse Gears 8 forward/6 reverse
    Transmission Direct drive, Powershift
    OPERATING SPECIFICATIONS
    UNITS: METRIC
    Articulation Angle – left/right 0 Degrees
    Forward – 1st 4.1 km/h
    Forward – 2nd 34.9 kN
    Forward – 3rd 8.0 km/h
    Forward – 4th 11.1 km/h
    Forward – 5th 17.5 km/h
    Forward – 6th 23.7 km/h
    Forward – 7th 32.7 km/h
    Forward – 8th 47.5 km/h
    Reverse – 1st 3.2 km/h
    Reverse – 2nd 6.0 km/h
    Reverse – 3rd 8.7 km/h
    Reverse – 4th 13.8 km/h
    Reverse – 5th 25.8 km/h
    Reverse – 6th 37.5 km/h
    Steering Range – left/right 47.5 Degrees
    Top Speed – forward 47.5 km/h
    Top Speed – reverse 37.5 km/h
    Turning Radius, outside front tires 7.3 m
    HYDRAULIC SYSTEM
    UNITS: METRIC
    Circuit Type Load Sensing, Closed Center, PPPC
    Maximum System Pressure 25500.0 kPa
    Optional High Output Pump 210.5 L/min
    Pump Output Standard Pump 159.1 L/min
    Pump Type Variable Piston
    Reservoir Tank Capacity 24.5 L
    Standby Pressure 3600.0 kPa
    MOLDBOARD
    UNITS: METRIC
    Blade Width 3.7 m
    Arc Radius 413.0 mm
    Blade Pull – base GVW 8112.0 kg
    Blade Pull – maximum GVW 10623.0 kg
    Cutting Edge – thickness 16.0 mm
    Cutting Edge – width 152.0 mm
    Down Pressure – base GVW 5594.0 kg
    Down Pressure – maximum GVW 9317.0 kg
    End Bit – thickness 16.0 mm
    End Bit – width 152.0 mm
    Moldboard – height 610.0 mm
    Moldboard – thickness 22.0 mm
    Throat Clearance 58.0 mm
    BLADE RANGE
    UNITS: METRIC
    Blade Tip Range – backward 5 Degrees
    Blade Tip Range – forward 40 Degrees
    Circle Centershift – left 658.0 mm
    Circle Centershift – right 656.0 mm
    Maximum Blade Position Angle 90 Degrees
    Maximum depth of cut 775.0 mm
    Maximum lift above ground 410.0 mm
    Maximum shoulder reach outside of tires – left 1764.0 mm
    Maximum shoulder reach outside of tires – right 1928.0 mm
    Moldboard Sideshift – left 512.0 mm
    Moldboard Sideshift – right 663.0 mm
    RIPPER
    UNITS: METRIC
    Machine length increase, beam raised 1058.0 mm
    Penetration force 4083.0 kg
    Pryout force 2108.0 kg
    Ripper shank holder spacing 533.0 mm
    Ripper shank holders, quantity 5
    Ripping depth – maximum 262.0 mm
    SCARIFIER
    UNITS: METRIC
    Mid, V-Type – Scarifier shank holder spacing 116.0 mm
    Mid, V-Type – Scarifier shank holders quantity 11
    Mid, V-Type – Scarifying depth, maximum 229.0 mm
    Mid, V-Type – Working width 1184.0 mm
    FRAME
    UNITS: METRIC
    Circle – blade beam thickness 30.0 mm
    Circle – diameter 1530.0 mm
    Drawbar – height 127.0 mm
    Drawbar – width 76.2 mm
    Front axle – height to center 615.0 mm
    Front axle – total oscillation per side 32 Degrees
    Front axle – wheel lean, left/right 18 Degrees
    Front-linear weights – maximum 172.0 kg/m
    Front-linear weights – minimum 134.0 kg/m
    Front-section modulus – maximum 3681.0 cm3
    Front-section modulus – minimum 1619.0 cm3
    Front-side plates – thickness 10.0 mm
    Front-side plates – width 236.0 mm
    Front-top/bottom plate – thickness 22.0 mm
    Front-top/bottom plate – width 280.0 mm
    TANDEMS
    UNITS: METRIC
    Drive chain pitch 44.5 mm
    Height 438.0 mm
    Sidewall thickness – inner 1.0 mm
    Sidewall thickness – outer 16.0 mm
    Tandem oscillation – front down 25 Degrees
    Tandem oscillation – front up 15 Degrees
    Wheel axle spacing 1510.0 mm
    Width 172.0 mm
    SERVICE REFILL
    UNITS: METRIC
    Circle drive housing 7.0 L
    Cooling system 40.0 L
    Engine Oil 18.0 L
    Front wheel spindle bearing housing 0.5 L
    Fuel Capacity 305.0 L
    Tandem housing (each) 49.0 L
    Transmission/Differential/Final Drives 48.0 L
    WEIGHTS
    UNITS: METRIC
    Gross Vehicle Weight – Typically Equipped 13843.0 kg
    Gross Vehicle Weight – Maximum 17000.0 kg
    Gross Vehicle Weight, Base – front axle 3120.0 kg
    Gross Vehicle Weight, Base – rear axle 9013.0 kg
    Gross Vehicle Weight, Base – total 12133.0 kg
    Gross Vehicle Weight, Maximum – front axle 5197.0 kg
    Gross Vehicle Weight, Maximum – rear axle 11803.0 kg
    Gross Vehicle Weight, Maximum – total 17000.0 kg
    Gross Vehicle Weight, Typically Equipped – front axle 3970.0 kg
    Gross Vehicle Weight, Typically Equipped – rear axle 9873.0 kg
    Gross Vehicle Weight, Typically Equipped – total 13843.0 kg
    STANDARDS
    UNITS: METRIC
    Brakes ISO 3450:1996
    ROPS/FOPS ISO 3471:1994/ISO 3449:2005
    Sound ISO 6394:2008, ISO 6396:2008
    Steering ISO 5010:2007
    DIMENSIONS (APPROXIMATE)
    UNITS: METRIC
    Ground Clearance – Center Front Axle 602.0 mm
    Ground Clearance, Trans. Case 341.0 mm
    Height to Exhaust Stack 2865.0 mm
    Height – Non-ROPS Cab 3321.0 mm
    Height – ROPS Cab 3326.0 mm
    Height – ROPS Canopy 3326.0 mm
    Height – Top of Cylinders 2885.0 mm
    Length – Between Tandem Axles 1510.0 mm
    Length – Counterweight to Ripper 9769.0 mm
    Length – Front Axle to Mid Tandem 5870.0 mm
    Length – Front Axle to Moldboard 2598.0 mm
    Length – Front Tire to Rear of Machine 8265.0 mm
    Width – Outside Front Tires 2449.0 mm
    Width – Outside Rear Tires 2439.0 mm
    Width – Tire Center Lines 2056.0 mm

  • CAT® C7 ENGINE

    Provides optimum power and fuel efficiency, combined with Power Management and Electronic Throttle Control, that assure maximum productivity. The 120K2 is certified to Bharat Stage III emissions standards.

    The 120K2 offers enhanced horsepower in the lower gears (1-3), which provides improved performance for tough applications like ripping and heavy blading, as well as the ability to carry more material for improved productivity.

    POWER TRAIN

    The Power Shift transmission features direct drive and electronic control for smooth, powerful shifts at any speed. Provides on-the-go, full-power shifting and inching capability. Direct drive delivers superior fuel efficiency and better “feel” of blade loads, material hardness and ground speed.

    The oil disc brakes located at each tandem wheel eliminate power train braking loads and reduce service time. The large brake surface area provides dependable braking capability and extended life before rebuild.

    Front axle with Cat sealed spindle keeps the bearings free from contaminants and lubricated in a lightweight oil to reduce owning and operating costs.

    HYDRAULICS

    Balanced Hydraulic flow and implement control valves ensure all implements operate simultaneously. Proportional hydraulic flow provides outstanding ‘feel’ and predictable movement. Independent oil supply prevents cross-contamination and provides proper oil cooling, signifying less heat build-up and extended component life.

    A load sensing variable displacement pump and advanced hydraulic valves provide superior implement control and better machine performance. Continuously matching hydraulic flow and pressure to power demands creates less heat and reduces power consumption.

    OPERATOR STATION

    120 K Series 2 cabs are designed to keep operators comfortable and productive. Features like low effort pedals and controls, adjustable implement controls and adjustable steering wheel angle make work easier for the operator. A clear view to the moldboard heel and tandem tires enhance productivity and safe operation.

    The instrument panel, with easy-to read, high-visibility gauges and warning lamps, places vital machine information and diagnostic capability in easy view of the operator. The dash includes an engine coolant temperature gauge, an articulation gauge, voltage gauge and fuel level gauge. Service brake air pressure gauges are also standard. All major systems are monitored by warning lights.

    Some additional cab features include storage area, adjustable control console and coat hook. Optional offerings include power port, air conditioner/heater, suspension seat, defroster fan, sun shade, backup lights, Product Link™ ready, and AccuGrade™ System ready. [NOTE: Some attachments are region specific].

    STRUCTURES/DRAWBAR-CIRCLE-MOLDBOARD

    Frame structure – provides consistency and strength. Drawbar, circle and moldboard are designed for high strength and optimum durability for any application. Blade lift accumulator is an optional feature and helps absorb impact loads and reduce unnecessary wear and as well as avoids unintended machine movement resulting in increased operator safety.

    WORK TOOLS AND ATTACHMENTS

    Allows expansion of machine versatility, utilization, and performance. The list includes:

    Ÿ

    • Moldboard optionsŸ
    • Ground engaging toolsŸ
    • Rear ripper/scarifierŸ
    • Front mounted groupsŸ
    • Mid-mount scarifierŸ
    • Snow removal work tools

    INTEGRATED TECHNOLOGIES

    CAT ACCUGRADETM

    AccuGrade uses positioning and guidance technologies, machine sensors, and automatic blade control to help operators get to grade faster, easier and more efficiently. Digital design plans, real-time cut/fill data, and in-cab guidance give operators detailed information to work more confidently and achieve greater accuracy, in fewer passes, using less material. Operators can stay on grade and improve productivity and accuracy by nearly 50 percent over conventional methods. Grade stakes and checkers are minimized, making the work site safe, efficient, and cost effective. AccuGrade technologies include Cross Slope, Sonic, Laser, GPS, and/or Universal Total Station (UTS).

    ACCUGRADE ATTACHMENT READY OPTION (ARO)

    K Series 2 machines can be equipped with the AccuGrade ARO. The attachment option includes built-in mounting points and internal wiring, making installation of the AccuGrade grade control system faster and easier.

    CAT PRODUCT LINKTM

    Product Link helps take the guesswork out of equipment management with remote monitoring capabilities for your machine or your entire fleet. Track asset location, hours, fuel usage, diagnostic codes, idle time and more through the web based secure VisionLink user interface.

    SERVICEABILITY

    Grouped service points on the left side of the machine ensure proper maintenance. Easy access to service areas speeds up maintenance and ensures that routine service is performed on time. Extended service intervals reduce downtime, operating cost.

    COMPLETE CUSTOMER SUPPORT

    TIPL, your Cat dealer is here to assist you with all the support and solutions you need to derive life cycle value out of your machine. From Pre purchase to rebuild, TIPL product support experts will guide you every so that you make the right choice.

     

  • 120K2 Motor Graders specalogs Click here to download













  • Service OptionsFinancing OptionsParts OptionsTraining Options

    YESNO




    captcha


For more information please call us at this number:

TOLL FREE :

1800 419 3356