Cat® Medium Wheel Loaders provide the most reliable, productive and comfortable experience in the industry, built to tackle a wide range of jobs.
The new Cat® 950 GC Wheel Loader is your ideal partner when you are looking for efficiency. Whether the job requires material handling, truck loading, load and carry work in quarries, sand and gravel pits ,or or general construction, 950GC is the right choice. Provides great performance coupled with lower operating costs. The features include excellent ease of operation, low fuel consumption as well lower acquisition cost. If you are looking for lifecycle value from your 5ton size class of wheel loaders, Cat 950GC will nicely fit the bill.
Net Power – ISO 9249 151.0 kW Engine Model Cat® C7.1 Bore 105.0 mm Stroke 135.0 mm Displacement 7.01 L Max Gross Power @ 2,000 rpm – ISO 14396 171.0 kW Max Gross Torque @ 1,400 rpm 1020.0 N·m Max Net Torque @ 1,300 rpm 931.0 N·m Rated Gross Power @ 2,200 rpm – ISO 14396 168.0 kW Rated Net Power @ 2,200 rpm – ISO 9249 151.0 kW
Operating Weight 18676.0 kg
Bucket Capacities 2.9 m3 to 4.4 m3 (3.8 yd3 to 5.75 yd3)
Breakout Force 147.0 kN Note **Compliance to ISO (2007) 14397-1 Sections 1 thru 5. Note *Full compliance to ISO (2007) 14397-1 Sections 1 thru 6, which requires 2% verification between calculations and testing. Static Tipping Load Full 40° Turn – ISO 14397-1* 10503.0 kg Static Tipping Load Full 40° Turn – Rigid Tires** 11197.0 kg
Forward 1 7.0 km/h Forward 2 12.5 km/h Forward 3 22.0 km/h Forward 4 34.0 km/h Reverse 1 7.0 km/h Reverse 2 12.5 km/h Reverse 3 22.0 km/h
Steering System Pump Type Piston Hydraulic Cycle Time – Lower, Empty, Float Down 2.8 Seconds Hydraulic Cycle Time – Dump, at Maximum Raise 1.2 Seconds Hydraulic Cycle Time – Raise from Carry Position 6.1 Seconds Hydraulic Cycle Time – Total Cycle Time 10.1 Seconds Implement System Pump Type Piston Implement System – Maximum Operating Pressure @ 50 ± 1.5 L/min 27900.0 kPa Implement System – Maximum Pump Output @ 2,200 rpm 248.0 L/min Implement System – Optional 3rd Function Maximum Flow 280.0 L/min Implement System – Optional 3rd Function Maximum Pressure @ 70 L/min 20680.0 kPa
Brakes Brakes meet ISO 3450
Choices Choices include: 23.5-25 16PR, L3 (Triangle); 23.5R25 ★★, L3 (Triangle); 23.5R25 ★, L3 (Bridgestone)
ROPS/FOPS ROPS/FOPS meet ISO 3471 and ISO 3449 Level II standards
SERVICE REFILL CAPACITIES
Cooling System 48.0 L Crankcase 20.0 L Transmission 45.0 L Differentials and Final Drives – Front 40.0 L Differentials and Final Drives – Rear 38.0 L Hydraulic Tank 120.0 L Fuel Tank Size 290.0 L
B-Pin Height 4188.0 mm B-Pin Height @ Carry 655.0 mm Lift Arm Clearance 3649.0 mm Height to Top of ROPS 3458.0 mm Height to Top of Exhaust Pipe 3596.0 mm Height to Top of Hood 2568.0 mm Ground Clearance 460.0 mm Center Line of Rear Axle to Edge of Counterweight 2001.0 mm Wheelbase 3300.0 mm Center Line of Rear Axle to Hitch 1650.0 mm Rack Back @ Maximum Lift 60.0 Degrees Dump Angle @ Maximum Lift 52.0 Degrees Rack Back @ Carry 45.0 Degrees Rack Back @ Ground 40.0 Degrees Height to Center Line of Axle 750.0 mm
Turning Radius to Inside of Tires 3419.0 mm Turning Radius to Outside Edge of Counterweight 6190.0 mm Turning Radius to Outside of Tires 6164.0 mm Width Over Tires 2745.0 mm
C7.1 built on a proven block with a new injection system specifically designed for fuel available in emerging markets. The Engine Idle Management System (EIMS) minimizes fuel consumption by reducing engine rpm after a specified amount of idle time.
The spacious cab features easy and intuitive controls and excellent visibility. The
cab provides a comfortable working environment for efficient all day operation. The complete operator interface has been designed with the operator in mind: easy to operate and simple to understand. The pilot-operated hydraulic implement controls deliver comfortable, low-effort operation.
The 950 GC cab offers an unmatched viewing area with a wide, flat, and distortion-free front windshield. Air conditioning and adjustable seat adds to operator comfort.
Load sensing hydraulics produce flow and pressure for the implement system upon demand and only in amounts necessary to perform the needed work functions. This state of the art system results in low fuel consumption.. Operators will also notice an excellent power balance between rimpull and implements.
More reliable and durable power train.
Our electrical and hydraulic service centers, along with additional key serviceability features, help make servicing customer machines and in-field component exchange quick, easy, and efficient. Grease fittings for difficult to reach components are grouped conveniently, allowing easy and quick preventive lubrication.
CAT PRODUCT LINKTM
Cat Product Link is a telematics solution, deeply integrated into the machine systems, allowing you to monitor the overall health of your machine including location tracking, fuel consumption and more.
Caterpillar design and manufacturing techniques assure outstanding service life.
Ease of maintenance and service.
MAINTENANCE AND SERVICE POINTS
All check and fill points are grouped at left hand side of the machine with flip open hood for easy access and service. Fewer lubrication points on loader and backhoe ends result in more machine uptime and less maintenance cost
The proven Cat Z-bar linkage geometry with Performance Series Buckets offer excellent penetration into the pile and high breakout forces. The results are low fuel consumption and exceptional production capabilities.
TIPL provides a wide range of services and solutions to meet the exact needs of your business. From pre purchase consultancy , ready parts delivery , maintenance to repair and rebuild, TIPL is there with you every step of the way. See our services section for more detail.
- 950GC Medium Wheel Loaders specalogs Click here to download
For more information please call us at this number:
TOLL FREE :
1800 419 3356